Radial Drill Machine

Radial Drill Machine Trader

The Radial Drill Machine is used to drill, core drill, ream, counter bore and tap holes of different sizes up to diameter of 50mm. The machine shall be appropriate for drilling in components of Ferrous and non-ferrous metals like Carbon Steel, alloy steel, cast steel, cast iron, Bronze, Copper, Aluminum and similar other materials. The drill is having massive and rigid construction. It has light centering spindle. It is the largest and most versatile drill used for drilling medium to drill large and heavy work pieces. Radial drilling machine belong to power feed type. The column and radial drilling machine supports the radial arm, drill head and motor. The radial arm slides up and down on the column with the help of elevating screw provided on the side of the column, which is driven by a motor. The drill head is mounted on the radial arm and moves on the guide ways provided the radial arm can also be swiveled around the column. The drill head is equipped with a separate motor to drive the spindle, which carries the drill bit. A drill head may be moved on the arm manually or by power. Feed can be either manual or automatic with reversal mechanism. It has drilling capacity of 25mm, 32mm, 38mm and 50mm.

Major Specifications

Drilling Capacity in Mild Steel25 mm
Machined Area of Base600 x 715 mm
Dia. of Column127 mm
Spindle BoreMT3
Spindle Travel225 mm
Maximum Spindle Centre to Column665 mm
Vertical Adjustment of Arm600 mm
Size of Box Table205 x 205 x 285 mm
Overall Height1420 mm
Floor Space Occupied700 x 1100 mm
No. of Spindle Speeds 8 (4 direct, 4 geared)120 to 2800
Spindle Feed byStar Lever and Worm
Drill Head Motor1 HP 1440 RPM
Elevating Motor0.5 HP 1440 RPM
Net Weight485 Kgs.
Vee BeltB40
Lifting Vee BeltV-20